Trade Certification Record

Terrazzo, Tile and Marble Setter (241A)

Terrazzo, Tile and Marble Setter (241A) is a voluntary trade in Ontario: you can legally work in it without certification. It has a certifying exam, and it is a Red Seal trade.

Fast facts

Trade code241A
SectorConstruction
ClassificationVoluntary trade
Certifying examRequired (O. Reg. 876/21, s. 3)
Apprentice to journeyperson ratioSubject to a ratio (O. Reg. 876/21, s. 4)
Red Seal tradeYes
Active apprentices in Ontario207 (reported in Ontario's apprenticeship dataset)
Approved sponsors23
Certifying bodySkilled Trades Ontario

Last verified August 20, 2026 against the sources listed below.

What does a terrazzo, tile and marble setter do?

A Terrazzo, Tile and Marble Setter covers interior and exterior walls, floors with terrazzo, tile and/or marble by preparing, measuring and marking the surface to be covered, mixing and applying mortar, mastic, cement, or other adhesives, using hand tools, laying mosaic tiles and removing and replacing cracked or damaged tiles.

Skilled Trades Ontario describes the work of this trade as follows:

  • uses and maintains electrical, pneumatic and hydraulic power tools
  • interprets blueprints and specifications
  • inspects and verifies materials and tools, and sets plumb, level and square lines and surfaces
  • prepares sub-surface
  • installs terrazzo and tile
  • performs mechanical installation of natural stone on walls
  • installs natural stone indoors by conventional or stacking method
  • installs natural stone slabs on floors and counter tops

How long is the terrazzo, tile and marble setter apprenticeship?

The in-school portion of this apprenticeship runs to 2 levels. Skilled Trades Ontario does not publish a total hour requirement for this trade on its trade page; confirm the current requirement in the trade's apprenticeship training standard before signing an agreement.

What do you study in school for the 241A?

The in-school portion covers, but is not limited to:

  • trade practices and procedures
  • blueprint reading and construction geometry
  • construction techniques and procedures
  • terrazzo installation
  • tile installation
  • natural stone installation

Is terrazzo, tile and marble setter a compulsory trade in Ontario?

No. Terrazzo, Tile and Marble Setter is a prescribed trade under section 1 of O. Reg. 876/21, but it is not on the compulsory list in section 2. That means you can legally work in this trade in Ontario without holding a Certificate of Qualification. Certification is voluntary and serves as formal proof of competency to employers and clients.

Voluntary classification only covers certification under the Building Opportunities in the Skilled Trades Act. Specific work within the trade can still require separate licences or permits under other Ontario statutes, so confirm the rules for the actual work being done. The 23 trades where certification is mandatory are on the compulsory trades list.

How do you become a terrazzo, tile and marble setter in Ontario?

The apprenticeship pathway for this trade is administered by Skilled Trades Ontario under section 14 of the Building Opportunities in the Skilled Trades Act, 2021:

  1. Find a sponsor and register a training agreement. An employer or union sponsor takes you on and the training agreement is registered with the ministry.
  2. Complete the on the job and in school training. The skills are set out in the trade's Apprenticeship Training Standard, signed off by your sponsor as you demonstrate them, alongside levels of in school theory at a training delivery agent.
  3. Receive your Certificate of Apprenticeship. Skilled Trades Ontario issues it when the program is complete.
  4. Pass the certifying exam. This trade has a certifying exam under O. Reg. 876/21, s. 3. Passing it earns the Certificate of Qualification, the voluntary proof of qualification for this trade.

The exact training standard, current curriculum and program details are on the Skilled Trades Ontario page for Terrazzo, Tile and Marble Setter. On the job hour requirements vary by trade and are not published on this page yet; confirm them in the training standard before signing an agreement.

Is there an apprentice to journeyperson ratio for the 241A?

Yes. Terrazzo, Tile and Marble Setter is one of the 33 trades that section 4 of O. Reg. 876/21 makes subject to an apprentice to journeyperson ratio. The regulation establishes that a ratio applies, but the numeric ratio itself is not stated in section 4. Confirm the current ratio with Skilled Trades Ontario before registering an additional apprentice, because it limits how many apprentices a sponsor may train at once.

Is the 241A a Red Seal trade?

Yes. Terrazzo, Tile and Marble Setter participates in the Interprovincial Red Seal Program, the national standard for the trade across Canada, stewarded by the Canadian Council of Directors of Apprenticeship. A Red Seal endorsement on an Ontario Certificate of Qualification means the qualification is recognized in other provinces and territories without re examination, which matters for workers moving between provinces and for employers hiring from outside Ontario.

The Red Seal exam for this trade, written under the national title Tilesetter, has 100 multiple-choice questions, each with four possible answers and exactly one correct answer.

How the 100 questions are distributed

BlockQuestions
A. Occupational skills12
B. Substrate preparation15
C. Layouts21
D. Material preparation14
E. Material setting24
F. Finishing14

By question type, this trade's exam runs 20 to 30% knowledge and recall, 55 to 65% procedural and application, and 10 to 20% critical thinking.

Already experienced? The Trade Equivalency Assessment

Workers with experience from outside Ontario's apprenticeship system, or from another country, can apply for a Trade Equivalency Assessment instead of starting an apprenticeship. Approval requires verifiable evidence of competency in the trade's Training Standard and experience at least equal to the trade's total training time; if approved, you challenge the certifying exam directly. The assessment costs $235 plus HST, and a reassessment with new evidence costs $100 plus HST, per Skilled Trades Ontario's Trade Equivalency Assessment page.

Certification is not the only paperwork

A Certificate of Qualification covers the person. Running a business in the trade carries its own obligations: many Ontario municipalities require a contractor licence on top of personal certification, and construction employers must complete WSIB registration before work begins. Both are indexed on our sister site: municipal contractor licensing requirements by city and WSIB Form 1000, registration of constructors and employers, on Ontario Trade Registry.

What does a terrazzo, tile and marble setter earn in Ontario?

Median wage$31.92 per hour
Low$21.00
High$45.10
Occupation measuredTilesetters (NOC 73101)
Reference period2023-2024

Published by Employment and Social Development Canada through Job Bank, for Ontario as a whole. Read it as the pay range for the occupational group this trade belongs to, not a guaranteed rate: one NOC code can cover more than one trade, and wages vary by region, employer and experience.

Is the 241A recognised outside Ontario?

This trade has been part of the Interprovincial Red Seal Program since 2001. 8 of Canada's 13 provinces and territories designate it Red Seal: BC, NB, NL, NS, ON, PE, QC, SK, Ontario among them. Its National Occupational Classification code is 73101, which is how federal labour market data refers to this occupation.

Where can you train as a terrazzo, tile and marble setter in Ontario?

Private training providers1
Approved sponsors23 employers registered to train apprentices
Apprentices in training207

Counts are from Ontario's published apprenticeships dataset. A sponsor is the employer or union that registers and trains the apprentice; you need one before an apprenticeship can start.

How dangerous is construction work in Ontario?

Ontario does not publish injury figures per trade, only by sector. In 2024 the Ministry of Labour recorded 18 worker fatalities and 442 critical injuries under the construction health and safety program. See the ten-year counts and what they leave out.

Related Ontario trades

Other construction sector trades with certification records on this registry:

Official verification sources

Classification, exam requirement and ratio status on this page are read directly from O. Reg. 876/21 as consolidated on e-Laws, not from secondary summaries. Facts not yet verified against a primary source are marked as not published rather than estimated.