Trade Certification Record

Electrician - Construction and Maintenance (309A)

Electrician - Construction and Maintenance (309A) is a compulsory trade in Ontario: certification is required by law to practice it. It has a certifying exam, and it is a Red Seal trade.

Fast facts

Trade code309A
SectorConstruction
ClassificationCompulsory trade (O. Reg. 876/21, s. 2)
Certifying examRequired (O. Reg. 876/21, s. 3)
Apprentice to journeyperson ratioSubject to a ratio (O. Reg. 876/21, s. 4)
Red Seal tradeYes
Active apprentices in Ontario9,260 (reported in Ontario's apprenticeship dataset)
Approved sponsors3,510
Certifying bodySkilled Trades Ontario

Last verified August 20, 2026 against the sources listed below.

What does an electrician - construction and maintenance do?

An Electrician – Construction and Maintenance plans, assembles, connects, installs, repairs, inspects, tests, verifies, and maintains electrical systems in various settings (i.

Skilled Trades Ontario describes the work of this trade as follows:

  • lays out, assembles, installs, repairs, maintains, connects and/or tests electrical systems
  • plans installations from blueprints, sketches and specifications, and installs all electrical and electronic devices
  • systematically diagnoses faults in electrical and electronic components, as required
  • measures, cuts, threads, bends, assembles and installs conduits and other electrical conductor raceways
  • splices and terminates electrical conductors
  • tests electrical and electronic equipment to ensure that they are functioning properly

How long is the electrician - construction and maintenance apprenticeship?

Total training hours9,000 (about 5 years)
On the job8,160 hours
In school840 hours
In-school levels3

These hours are set by the Registrar of Skilled Trades Ontario under section 14 of the Building Opportunities in the Skilled Trades Act, 2021.

What do you study in school for the 309A?

The in-school portion covers, but is not limited to:

  • codes, legislation and regulations
  • blueprints, drawings and specifications
  • trade communication and documentation
  • electrical theory, wiring, motor starters and controls
  • transformers, generators, electronics
  • conductors and cables
  • installation methods
  • instrumentation and power distribution
  • fire alarm and building systems, high voltage systems, control systems
  • electrical equipment maintenance
  • job planning
  • grounding and bonding
  • distribution equipment
  • protective devices

Is electrician - construction and maintenance a compulsory trade in Ontario?

Yes. Electrician - Construction and Maintenance is one of the 23 trades classified as compulsory by section 2 of O. Reg. 876/21 under the Building Opportunities in the Skilled Trades Act, 2021. To practice a compulsory trade legally in Ontario, a person must hold a Certificate of Qualification, a Provisional Certificate of Qualification, or a Registered Training Agreement, and their information appears on the Skilled Trades Ontario Public Register, where anyone can check whether a specific person is certified.

Working in this trade without one of those three documents is an offence, subject to limited exemptions such as approved pre-apprenticeship program participants. See the full list of compulsory trades in Ontario for how this trade compares to the other 22.

How do you become an electrician - construction and maintenance in Ontario?

The apprenticeship pathway for this trade is administered by Skilled Trades Ontario under section 14 of the Building Opportunities in the Skilled Trades Act, 2021:

  1. Find a sponsor and register a training agreement. An employer or union sponsor takes you on and the training agreement is registered with the ministry. For this trade the Registered Training Agreement is also your legal authorization to work while you train.
  2. Complete the on the job and in school training. The skills are set out in the trade's Apprenticeship Training Standard, signed off by your sponsor as you demonstrate them, alongside levels of in school theory at a training delivery agent.
  3. Receive your Certificate of Apprenticeship. Skilled Trades Ontario issues it when the program is complete.
  4. Pass the certifying exam. This trade has a certifying exam under O. Reg. 876/21, s. 3. Passing it earns the Certificate of Qualification, which compulsory trade workers must then hold and renew to keep practicing.

The exact training standard, current curriculum and program details are on the Skilled Trades Ontario page for Electrician - Construction and Maintenance. On the job hour requirements vary by trade and are not published on this page yet; confirm them in the training standard before signing an agreement.

Is there an apprentice to journeyperson ratio for the 309A?

Yes. Electrician - Construction and Maintenance is one of the 33 trades that section 4 of O. Reg. 876/21 makes subject to an apprentice to journeyperson ratio. The regulation establishes that a ratio applies, but the numeric ratio itself is not stated in section 4. Confirm the current ratio with Skilled Trades Ontario before registering an additional apprentice, because it limits how many apprentices a sponsor may train at once.

Is the 309A a Red Seal trade?

Yes. Electrician - Construction and Maintenance participates in the Interprovincial Red Seal Program, the national standard for the trade across Canada, stewarded by the Canadian Council of Directors of Apprenticeship. A Red Seal endorsement on an Ontario Certificate of Qualification means the qualification is recognized in other provinces and territories without re examination, which matters for workers moving between provinces and for employers hiring from outside Ontario.

The Red Seal exam for this trade, written under the national title Construction Electrician, has 100 multiple-choice questions, each with four possible answers and exactly one correct answer.

How the 100 questions are distributed

Major Work ActivityQuestions
A. Performs common occupational skills11
B. Installs, services and maintains generating, distribution and service systems28
C. Installs, services and maintains wiring systems30
D. Installs, services and maintains motors and control systems21
E. Installs, services and maintains signalling and communication systems10

By question type, this trade's exam runs 5 to 15% knowledge and recall, 60 to 70% procedural and application, and 20 to 30% critical thinking.

From this site

Construction Electrician (309A) Practice Exam

150 original practice questions with a full answer key, split across the trade's major work activities in the same proportions as the published exam breakdown, and an explanation and source citation on every question. 10 sample questions are free to read, answers included.

See the 10 free samples and the full weighting, $40 CAD

Independent study aid published by Ontario Certification Registry. Not affiliated with, endorsed by, or sourced from Skilled Trades Ontario, the Technical Standards and Safety Authority, or the Red Seal Program. Every question is original and written from the cited public source. Studying it does not guarantee an exam result. Everything else on this site is free.

How often does the certificate need to be renewed?

Journeypersons in compulsory trades must renew their Certificate of Qualification every year, per Skilled Trades Ontario. A lapsed certificate in a compulsory trade means the holder is no longer legally entitled to practice the trade until it is restored, so the renewal date is worth tracking ahead of time. The current renewal fee is not published on this page yet; confirm it with Skilled Trades Ontario.

Already experienced? The Trade Equivalency Assessment

Workers with experience from outside Ontario's apprenticeship system, or from another country, can apply for a Trade Equivalency Assessment instead of starting an apprenticeship. Approval requires verifiable evidence of competency in the trade's Training Standard and experience at least equal to the trade's total training time; if approved, you challenge the certifying exam directly. The assessment costs $235 plus HST, and a reassessment with new evidence costs $100 plus HST, per Skilled Trades Ontario's Trade Equivalency Assessment page.

Certification is not the only paperwork

A Certificate of Qualification covers the person. Running a business in the trade carries its own obligations: many Ontario municipalities require a contractor licence on top of personal certification, and construction employers must complete WSIB registration before work begins. Both are indexed on our sister site: municipal contractor licensing requirements by city and WSIB Form 1000, registration of constructors and employers, on Ontario Trade Registry.

For wages, demand and what the day-to-day work looks like, see the Electrician - Construction and Maintenance career profile on Blue Crane Works.

What does an electrician - construction and maintenance earn in Ontario?

Median wage$34.00 per hour
Low$20.00
High$50.50
Occupation measuredElectricians (except industrial and power system) (NOC 72200)
Reference period2023-2024

Published by Employment and Social Development Canada through Job Bank, for Ontario as a whole. Read it as the pay range for the occupational group this trade belongs to, not a guaranteed rate: one NOC code can cover more than one trade, and wages vary by region, employer and experience.

Is the 309A recognised outside Ontario?

This trade has been part of the Interprovincial Red Seal Program since 1959. 13 of Canada's 13 provinces and territories designate it Red Seal: AB, BC, MB, NB, NL, NS, NT, NU, ON, PE, QC, SK, YT, Ontario among them. Its National Occupational Classification code is 72200, which is how federal labour market data refers to this occupation.

Where can you train as an electrician - construction and maintenance in Ontario?

Public training providers19 colleges deliver the in-school portion
Private training providers1
Approved sponsors3,510 employers registered to train apprentices
Apprentices in training9,260

Counts are from Ontario's published apprenticeships dataset. A sponsor is the employer or union that registers and trains the apprentice; you need one before an apprenticeship can start.

How dangerous is construction work in Ontario?

Ontario does not publish injury figures per trade, only by sector. In 2024 the Ministry of Labour recorded 18 worker fatalities and 442 critical injuries under the construction health and safety program. See the ten-year counts and what they leave out.

Related Ontario trades

Other construction sector trades with certification records on this registry:

Official verification sources

Classification, exam requirement and ratio status on this page are read directly from O. Reg. 876/21 as consolidated on e-Laws, not from secondary summaries. Facts not yet verified against a primary source are marked as not published rather than estimated.